| Customization: | Available |
|---|---|
| Power Capacity: | 0.5/1kVA(AC Servo Motor) |
| Recommendedl.M.M.: | 50-100ton |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The HA series robot arm is used for the finished product and nozzle of each type of plastic horizontal injection molding machine of 50T-250T. Model 550/650/750/850/950, the upper and lower arm types are single-cut and double-cut and double-cut; the upper and lower strokes are from 550-950mm. The jib can be added to the three-piece mold, while the finished product and the material head are clamped. The horizontal axis is driven by a variable frequency motor and driven by an AC servo motor. Install this series of robots to increase production capacity (20%-30%) and reduce product defect rate. Guarantee the safety of operators, reduce workers, accurately control production, and reduce waste.
Parameter:
|
Model |
HAVM-550 |
|
Size (length*width*height) |
1787*1200*1300mm |
|
Power Source |
AC220V±10V 50/60 HZ |
|
Working Pressure |
5Kgf/cm² 0.49Mpa |
|
Max.AllowedPressure |
8Kgf/cm² 0.8Mpa |
|
Drive System |
Z By model X.Y Pneumatic Cylinder |
|
Swivel |
90°Fixed Pneumatic |
|
Control System |
HS48 |
|
Power Capacity |
0.5/1KVA(AC servo Motor) |
|
Recommendedl.M.M. |
50-100ton |
|
Traverse Stroke |
1000mm |
|
Traverse Driven |
Standard: variable frequency motor / AC servo motor |
|
Crosswise Stroke |
P:250mm R:100mm |
|
Vertical Stroke |
550mm |
|
Max.Loading |
3Kg |
|
Dry Take Out Time |
1s |
|
Dry Cycle Time |
8s |
|
Air Consumption |
19 NI/cycle |
|
Net Weight |
140-180Kg |
){kind=link}